Free 301a Exam Files Downloaded Instantly 100% Dumps & Practice Exam
Free Exam Updates 301a dumps with test Engine Practice
NEW QUESTION # 40
An LI M device is experiencing a high volume of traffic. The virtual server is struggling under the load. The problem appears to be on the server side connections. The virtual server is accepting connections . The virtual server is accepting connections on https and is configured with an SSL profile and http pool.
What should be added to increase the performance of the device?
- A. a SPDY profile
- B. smaller key to the SSL profile
- C. a One Connect profile
- D. an HTTP Compression profile
Answer: C
NEW QUESTION # 41
An LTM Specialist needs to create an iRule that creates persistence records based on a JSESSIONID cookie. If a persistence record already exists, then the iRule must persist the client connection according to the existing record.
Which persistence profile enables the iRule to meet these requirements?
- A. Destination Address Affinity
- B. Universal
- C. Source Address Affinity
- D. Cookie
- E. SSL
Answer: B
NEW QUESTION # 42
The picture belongs to static content, you can configure static content cache in FS to meet this demand An LTM Specialist must configure session persistence for a highly available, highly utilized web-based application.
* The following requirements are provided:
* http proxy setup for security
persistence information available to the HA peer in case of failover
The LTM Specialist needs to minimize additional burden on the LTM device to the greatest extent possible.
Which persistence profile should be used?
- A. Destination Address Affinity
- B. Cookie insert
- C. Source Address Affinity
- D. Universal
Answer: B
NEW QUESTION # 43
An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.
Which monitor type and parameters arc required?
- A. TCP monitor, alias address 192.168.10.10. and set the alias to port 80
- B. TCP monitor, change transparent option to Yes, and sot the alias to port 80
- C. TCP monitor change transparent option to Yes. set alias address 192.168.10.10. and set the alias to port 80
- D. HTTP monitor alias address 192 168.10 10. and set the alias to port 80
Answer: C
NEW QUESTION # 44
When importing a PEM formatted SSL certificate, which text needs to appear first in the file?
- A. ...BEGIN CERTIFICATE....
- B. ...SECURITY CERTIFICATE....
- C. ...SSL CERTIFICATE....
- D. --START CERTIFICATE....
Answer: A
NEW QUESTION # 45
Refer to the Exhibit.
An LTM Specialist notices that two members in a pool are overloaded. To relive the existing members a fourth member (10.128.20.14) is brought up.
How many member will receive and process new connections?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 46
An LTM Specialist needs to use the tmsh command to create a pool named http_pool with member
10.10.101:80 on an LTM device.
Which expression should the LTM Specialist use?
- A. # tmsh create itm pool http_pool member {10.10.10.101:80}
- B. # tmsh create pool http_pool members {10.10.10.101:80}
- C. # tmsh create it pool http_pool members {10.10.10.101:80}
- D. # tmsh create pool http_pool members add {10.10.10.101:80}
Answer: C
Explanation:
The option should be wrong, it should ne itm instead of it, the correct command is:tmsh create itm pool http_pool members add (10.10.10.101:80}
NEW QUESTION # 47
Refer to the exhibit.
The http monitor is applied to a pool All members are enabled One pool member stops responding TCP port 80. The server still responds to ping.
What is the resulting status of this pool member?
- A. Available (Enabled)
- B. Unknown (Enabled)
- C. Offline (Disabled)
- D. Unavailable (Disabled)
Answer: A
NEW QUESTION # 48
An LTM Specialist needs to assign a health monitor to a pool with two pool members 10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP. The health of the application depends on the health of an another server (10 10 10 100) that runs port 9080 with TCP.
Which two custom TCP monitors should be selected as the pool's health monitors' (Choose two)
- A. a custom TCP monitor that works on port 9080 with 10.10.10.100 as alias address
- B. a custom TCP monitor that works on port 8080 with 10.10.10.102 is alias address
- C. a custom TCP monitor that works on port 9080 with 10,10.10.101 as alias address
- D. a custom TCP monitor that works on port 9080,
- E. a custom TCP monitor that works on port 8080 with 10.10.10.101 as alias address
- F. a custom TCP monitor that works on port 8080
Answer: A,F
NEW QUESTION # 49
A VCMP guest has the following characteristics:
* Resources allocated for CPU memory, network interfaces, and disk space
* Virtual disk created
* The guest is NOT running
The guest is NOT running in which state is the VCMP guest
- A. Provisioned
- B. Configured
- C. Offline
- D. Deployed
Answer: A
NEW QUESTION # 50
An LTM Specialist needs to create two virtual servers.
The application has links for both HTTP and HTTPS version of application. The client must be persistence to a pool member, no matter which virtual server is accessed.
What must be selected in the Source Address Affinity persistence profile?
- A. Match across Services
- B. Match across Virtual Servers
- C. Match across Pool Members
- D. Match across Polls
Answer: B
NEW QUESTION # 51
A virtual server configuration for traffic destined to a server is as shown:
HTTP traffic is destined to the 10 10.20.1 server from the source
Based on precedence, which virtual server accepts this traffic?
- A. MyVS3
- B. MyVS4
- C. MyVS2
- D. MyvS1
Answer: C
NEW QUESTION # 52
Exhibit.
Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.
LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to all servers.
What is the expected failover behavior?
- A. LTM1 Active / LTM2 Standby
- B. LTM1 Standby / LTM2 Standby
- C. LTM1 Active /LTM2 Active
- D. LTM1 Standby / LTM2 Active
Answer: A
NEW QUESTION # 53
A virtual server with SNAT automap enabled selects pool member 10.20.0.10.443 for the server-side flow. The client side flow source IP is 192.168.0.10 .
Which source IP should be expected in the server-side connection?
- A. 192.168.0.10
- B. 10.20.0.1
- C. 10.50.0.2
- D. 10.20.0.2
Answer: D
NEW QUESTION # 54
A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN Which TMOS command enables this behavior?
- A. tmsh modify net van External failsafe enabled
- B. tmsh create sys ha-group External trunks add External threshold 2 weight 101)
- C. tmsh create sys ha-group External trunks add Externally
- D. tmsh create sys ha-group External trunks add ( External( attribute percent up-members 100))
Answer: B
NEW QUESTION # 55
Exhibit.
The server team has recently configured the three new DNS servers shown for the data center. No current DNS servers are currently configured on the LTM device.
Which command should be used to configure the LTM device to use the new DNS servers?
- A. tmsh modify/sysdns name-servers add {192.168.1.2.192.168.100.100.192.168.200.200}
- B. tmsh change /sysdns name-servers add {192.168.1.2.192.168.100.100.192.168.200.200}
- C. tmsh set/sysdns name-servers add {192.168.2.192.168.100.100.192.168.200.200}
- D. tmsh create/systins name-servers add {192 168.1.2.192.168.100.1O0.192.168.2O0.2OO}
Answer: A
Explanation:
Modify the configuration with modify, and create the configuration with create. Excluding B and D, and the question is to modify the DNS pointer of E5 itself the need to use is modify.
NEW QUESTION # 56
......
Provide Valid Dumps To Help You Prepare For BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam: https://pass4sure.dumps4pdf.com/301a-valid-braindumps.html