[Mar-2026] Dumps Practice Exam Questions Study Guide for the 300-610 Exam
300-610 Dumps with Practice Exam Questions Answers
NEW QUESTION # 131
Refer to the exhibit.
The security team created a new security policy that requires certain types of traffic to be subject to deep packet inspection The traffic types are
* internet traffic to application servers
* internet traffic to corporate users
* partner network traffic to application servers
* partner network traffic to corporate users
Where must the next-generation firewalls be inserted to implement the new policy?
- A. inline insertion between the edge router duster and the core switch duster
- B. inline insertion between the user network switch cluster and the core cluster
- C. one-armed insertion from the core switch cluster
- D. one-armed insertion from the ACl border leaf duster
Answer: D
NEW QUESTION # 132
An engineer working for a private data center with an employee ID 4947.57 424 designs a storage area network solution The requirement is to apply QoS to ensure that Fibre Channel data traffic for latency-sensitive applications receives higher pnonty over throughput-intensive applications that are used for data warehousing Which two attributes must be used to identify and set the Fibre Channel traffic classes? (Choose two )
- A. egress interface
- B. source or destination FCID
- C. destination FCID
- D. source or destination WWN
- E. source WWN
Answer: B,D
NEW QUESTION # 133
An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster. Which two UCS policies meet these requirements? (Choose two.)
- A. scrub policy
- B. boot policy
- C. vNIC policy
- D. LAN connectivity policy
- E. firmware policy
Answer: C,D
NEW QUESTION # 134
A company must integrate an iSCSI storage solution into its existing production environment. The new iSCSI network must be accessible from a limited set of network segments. The client devices follow a strict network security policy to access critical data from the storage array. Which design steps must be used to meet these requirements?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: D
NEW QUESTION # 135
Drag and Drop Question
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
Explanation:
End-host mode features include:
- Spanning Tree Protocol is not run on both the uplink ports and the server ports.
- MAC address learning occurs only on the server ports; MAC address movement is fully supported.
- Links are active-active regardless of the number of uplink switches.
- The system is highly scalable because the control plane is not occupied.
Ethernet switching mode features include:
- Spanning Tree Protocol is run on the uplink ports per VLAN as defined by Cisco Per-VLAN Spanning Tree Plus (PVST+)
- Configuration of Spanning Tree Protocol parameters (bridge priority, hello timers, etc.) is not supported.
- VLAN Trunk Protocol (VTP) is not supported.
- MAC address learning and aging occur on both the server and uplink ports as in a typical Layer 2 switch.
- Upstream links are blocked according to Spanning Tree Protocol rules.
NEW QUESTION # 136
A network design must include a solution to run CLI commands remotely on Cisco Nexus 9000 Series Switches. The customer's security policy requires secure login credentials and an encrypted underlying transport. The command output will be processed rising tools that support XML or JSON encoding.
Which two components should be included in the design? (Choose two.)
- A. Bash shell
- B. HTTPS
- C. HTTP
- D. NX-API
- E. SSH
Answer: B,D
Explanation:
NX-API supports HTTPS. All communication to the device is encrypted when you use HTTPS.
NX-API is integrated into the authentication system on the device. Users must have appropriate accounts to access the device through NX-API. NX-API uses HTTP basic authentication. All requests must contain the username and password in the HTTP header.
You should consider using HTTPS to secure your user's login credentials.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6- x/programmability/guide/b_Cisco_Nexus_9000_Series_NX- OS_Programmability_Guide/b_Cisco_Nexus_9000_Series_NX- OS_Programmability_Configuration_Guide_chapter_0101.html
NEW QUESTION # 137
A Cisco engineer is using a PowerShell script to create a service profile template on Cisco UCS Manager.
After defining the server pools and other templates, the engineer must ensure that the hosts are visible lo the northbound SAN network and storage initiators. Which configuration must be applied to enable this capability?
- A. Get-UcsApplianceCloud | Get-UcsVlan -Name AppIianceVlan | Add-UcsVlanMemberPortChannel - Switchld A -Portld $ap_pc.Portld
- B. Get-UcsApplianceCloud | Get-UcsVlan -name AppIianceVlan | Add-UcsVlanMemberPort -Switchld A - Slotld 1 -Portld 15
- C. Swwpn.pool | Add-UcsWwnMemberBlock -From 20:00:00:24: B5:00:00:00 -To 20:00:00:24: B5:00:00:
09 - D. Get-UcsMacPool -lies <handle or name> default | Add-UcsMacMemberBlock 00:25: B5: OO: A0:O0
00:25: B5:00:AO:08
Answer: C
NEW QUESTION # 138
An engineer manages hundreds of Cisco Nexus Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive support, and is object-oriented. Which automation tool should be used to meet these requirements?
- A. Bash
- B. YAML
- C. Perl
- D. Phython
Answer: D
Explanation:
Python is object-oriented and imperative language.
YAML is declarative.
NEW QUESTION # 139
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION # 140
A company has several data centers with hundreds of Cisco UCS blade chassis. A network consultant plans to active Cisco Discovery Protocol to the servers to facilitate Layer 1 troubleshooting. For security reasons, the company wants to restrict the servers from sending different MAC addresses to the fabric interconnect after the MAC address from the first packet is learned. Which two policies be modified to support this design?
(Choose two.)
- A. Ethernet Adapter
- B. vNIC Template Policy
- C. Pin Group Policy
- D. vNIC Policy
- E. Network Control Policy
Answer: B,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Network-Mgmt
/4-0/b_UCSM_Network_Mgmt_Guide_4_0/b_UCSM_Network_Mgmt_Guide_4_0_chapter_01010.html
https://jeremywaldrop.wordpress.com/2010/05/03/how-to-enable-cdp-on-cisco-ucs-vnics/
NEW QUESTION # 141
Which address pool is used when a vHBA template is created?
- A. MAC
- B. UUID
- C. IP
- D. WWPN
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-
1/b_UCSM_GUI_Configuration_Guide_2_1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_0
11010.html
NEW QUESTION # 142
Where does Cisco UCS handle Fibre Channel traffic failover?
- A. in the hardware on any Cisco UCS VIC adapter
- B. in the hardware on the Cisco UCS VIC 12xx adapter or later
- C. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
- D. on the host, by using multipathing software
Answer: D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION # 143
An engineer must logically partition two Cisco Nexus 7000 Series Switches into two environments called Test_39919596 and Production_59423879. The environments must use only F2-Series line cards and be limited to a maximum of 265 port-channels.
Which Cisco Nexus feature must be used?
- A. vPC
- B. VDC
- C. vFC
- D. VRF
Answer: D
NEW QUESTION # 144
A network engineer must select a high availability feature for their data center. The solution must ensure network resilience, reduce network instability for Layer 3 routing protocols, and meet these requirements:
- The device must notify its neighbors when the control plane is
undergoing a restart.
- The solution must suppress routing flaps in case of stateful
switchovers.
Which solution must be implemented?
- A. NSF
- B. HSRP
- C. BFD
- D. ISSU
Answer: A
NEW QUESTION # 145
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION # 146
A company Is using Cisco UCS and wants a network orchestration solution to meet these requirements :
centrally manage compute and storage platforms
reduce the time it takes to detect an outage
easily exchange data with TAC to reduce resolution times
The company does not have in-house knowledge about scripting. Which solution must the company choose?
- A. Cisco DCNM
- B. Cisco HyperFlex
- C. Cisco Intersight
- D. Cisco UCS Central
Answer: D
NEW QUESTION # 147
Refer to the exhibit.
A default route must be advertised into the VXLAN fabric for internet access. The engineer must use a static route because the edge firewall does not support any dynamic routing protocol. Which two features must the engineer use to allow learning and withdrawing of the default route without any manual intervention? (Choose two)
- A. policy-based routing
- B. Network Address Translation
- C. anycast gateway
- D. IP forwarding
- E. HMM tracking
Answer: A,C
NEW QUESTION # 148
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION # 149
A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node tor the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)
- A. Gigabit Ethernet Switch
- B. HX220c
- C. UCS B200
- D. HX240c
- E. Fabric Interconnect 6300
Answer: A,B
Explanation:
HX240 is excluded because it is 2RU, while the requirement is to have one rack unit of space.
UCS B200 and FI 6300 are excluded because the solution is required in a branch.
NEW QUESTION # 150
An engineer must connect a Cisco UCS B-Series based system to an existing large storage area network fabric. The deployment must support hardware-based load balancing, prevent Fibre Channel domain ID exhaustion, and enable all blade servers to be in the same VSAN. Which set of actions meets the requirements?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: D
NEW QUESTION # 151
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION # 152
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
- A. GPU support
- B. storage capacity
- C. processor count
- D. network speed
Answer: B
Explanation:
https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflex-hx-series
/whitepaper-c11-740243.pdf
https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflex-hx-series/hx-
220c-m5-specsheet.pdf
NEW QUESTION # 153
The user traffic destined to all web servers located in the data center must pass first through a set of firewalls for deep packet inspection. A network architect must design the Cisco Intelligent Traffic Director (ITD) deployment that meets these requirements:
The firewalls are connected to a set of two Cisco Nexus switches to provide stateful handling of traffic.
The ITD service is provided for inside and outside segments of the firewall.
Which ITD deployment mode must be implemented to meet these requirements?
- A. server load-balancing deployment mode
- B. one-arm deployment mode
- C. sandwich deployment mode
- D. server vPC deployment mode
Answer: B
NEW QUESTION # 154
......
Cisco 300-610 exam covers a range of topics related to designing data center infrastructure solutions, including data center network design, storage network design, compute design, and automation. Candidates who pass 300-610 exam will have a deep understanding of data center design principles and will be able to design data center solutions that meet the needs of their organizations.
Free CCNP Data Center 300-610 Exam Question: https://pass4sure.dumps4pdf.com/300-610-valid-braindumps.html