Updated Mar-2026 MB-310 Free Exam Files Downloaded Instantly [Q113-Q135]

Updated Mar-2026 MB-310 Free Exam Files Downloaded Instantly

Practice Exams and Training Solutions for Certifications

NEW QUESTION # 113
You are the controller for an organization. The company purchased six service trucks. You observe that your accountant set up Fixed assets - vehicles in the wrong fixed asset group.
You need to achieve the following:
Change the fixed asset group so that the existing fixed asset transactions for the original fixed asset are canceled and regenerated for the new fixed asset.
Ensure that all value models for the existing fixed asset are created for the new fixed asset. Any information that was set up for the original fixed asset is copied to the new fixed asset.
Close the old fixed asset number in the old fixed assets group and create a new fixed asset number in the new fixed assets group.
Ensure that the historical transactions are transferred to the new fixed asset.
Ensure Historical Depreciation expense entries do not change.
What should you do?

A. Reclassify the fixed asset
B. Copy the fixed asset
C. Transfer the fixed asset
D. Change the fixed asset group and keep the same fixed asset number

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/financials/fixed-assets/tasks/reclassify-fixed-assets

NEW QUESTION # 114
You are configuring a Dynamics 365 Finance environment for intercompany accounting. You create the following legal entities:
* CompanyA
* CompanyB
You need to configure intercompany accounting for both legal entities.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

Answer:

Explanation:

Explanation

Reference:
https://docs.microsoft.com/en-us/dynamics365/finance/general-ledger/intercompany-accounting-setup

NEW QUESTION # 115
A company is implementing Microsoft Dynamics 355 -Finance. The company plans to Implement the fixed asset module. You have the full awing requirements:
* Post transactions to the tax depreciation hook at the same interval as the primary book.
* Tax transactions must be journalized without being recorded in the general ledger.
You need to configure the 'wet! asset books.
Which conjuration option should you use? To , drag the appropriate urn figurations to the correct requirement.
Each configuration may be used once, more than once, more not at all You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION # 116
A client wants to use Dynamics 365 Finance invoice validation functionality.
You need to recommend the invoice validation functionality that meets their requirements.
Which functionality should you recommend for each requirement? To answer, drag the appropriate functionality to the correct requirement. Each functionality may be used once, more than once, or not at all.
You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:

Reference:
https://docs.microsoft.com/en-us/dynamics365/finance/accounts-payable/tasks/set-up-accounts-payable-invoice-

NEW QUESTION # 117
Which configuration makes it possible for User4 to make a purchase?

A. Budget funds available are configured to allow dimension budget overrides.
B. Budget is posted at the main account level. Budget control is managed at the department level.
C. Budget is posted at the dimension level. Budget control is managed at main account level.
D. Budget model configuration is configured to allow certain purchases to exceed budget.

Answer: C

NEW QUESTION # 118
You need to determine the root cause for User1's issue.
Which configuration options should you check? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

Topic 3, Alpine Ski House
Case study
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the button to return to the question.
Background
Alpine Ski House has three partially owned franchises and 10 fully owned resorts throughout the United States and Canada. Alpine Ski House's percentage ownership of the franchises is between two and 10 percent.
Alpine Ski House is undergoing an implementation of Dynamics 365 Finance and Dynamics 365 Supply Chain Management to transform their financial management and logistics capabilities across the franchises.
Implementation is complete for Alpine Ski House's corporate offices, two US franchises, and one Canadian franchise. The remaining franchises are in varying stages of the implementation. Two new resort projects are in the budget planning stages and will open in the next fiscal year.
Current environment
Organization and general ledger
Each franchise is set up as a legal entity in Dynamics 365 Finance.
Alpine Ski House Corporate uses financial dimensions for their fully owned resorts.
Each resort is a financial dimension named resort.
Each fully owned resort has two divisions: marketing and operations.
Only Profit and Loss account postings require the division dimension.
Corporate handles the advertising and administration of the fully owned resorts.
Corporate uses Dynamics 365 Project Management and Accounting to manage construction of new resorts.
Budgeting
Organizational budgeting is decentralized but rolls up to one organizational corporate budget.
Each resort manager performs budgeting in Dynamics 365 Finance.
Budget preparation begins this month. All operational resorts will submit their budgets in two weeks.
Sales and tax
Sales tax is configured and used by all resorts that operate in the United States.
You configure one US sales tax vendor account and assign the vendor account to the settlement periods for reporting.
You use accounts receivable charges to track donations.
Existing purchasing contracts
Each franchise resort has an individual contract with a local supplier of their choosing to purchase at least $10,000 worth of suppliers during the calendar year.
The franchise resorts in one US state receive a two percent discount on meat and vegetable purchases in excess of $8,000 per year.
A franchise resort in Utah has agreed to purchase 1,000 units of beef at market price from a local supplier.
Alpine Ski House uses a vendor collaboration portal to track purchase orders and requests for quotes.
Vendors request access to the vendor collaboration portal by using a workflow which runs on a nightly schedule.
Intercompany setup
Vendor123 resides in US franchise Company1 and is set up for intercompany transactions. Customer345 resides in Canada franchise Company1 and is set up for intercompany transactions.
Requirements
Franchises
Each franchise must pay two percent of monthly sales to Alpine Ski House Corporate.
Each franchise must report their own financials to Alpine Ski House Corporate monthly.
US franchises require a three-way-match on all purchases, with a 1-percent price tolerance.
Canadian franchises require a three-way-match on all purchases except paper products, which have a
10-percent price tolerance.
Corporate
Advertising costs must be balanced across the 10 resorts monthly. These costs must be split across the
12 resorts once construction of the final two resorts is completed.
Administration costs must be split across the 10 resorts proportional to the amount of sales generated.
One percent of all pack and individual ski pass sales must be donated quarterly to an environmental protection organization.
The finance department must be able to see purchasing contracts and discounts for vendors based on volume spend.
Employees
All employee expense reports that contain the word must be reviewed for the audit purposes. If a journal is posted incorrectly, the entire journal and not just the incorrect line must be fully reversed for audit purposes.
Resorts
All resorts must use Dynamics 365 Finance for budgeting and must first be approved by the regional manager.
Purchased fixed assets must automatically be acquired at product receipt.
Issues
User1 reports that irrelevant dimensions display in the drop down when entering a General journal.
User2 reports that dimension 00 is being used for all balance sheet accounts.
User3 tries to generate the quarterly sales tax liability payment for a specific state but does not see any payables available for that state's vendor.
User4 receives a call from a vendor who cannot access the vendor collaboration portal but needs immediate access.
User5 notices a large amount of entertainment expenses being posted without an audit review.
User6 needs to have visibility into the increase in budget that is necessary to staff the two new resorts opening next year.
User7 needs to use Dynamics 365 Finance for situational budgeting planning with the ability to increase and decrease the existing plans by certain percentages.
User8 made a mistake while posting a 1,000-line journal and reverses the entire journal but cannot find the lines that included errors during the reversal.
User9 made a mistake while posting a 55-line journal and reverses the entire journal.
User10 realizes that the purchase of five new computers did not acquire five new fixed assets upon receipt.

NEW QUESTION # 119
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are configuring the year-end setup in Dynamics 365 for Finance and Operations.
You need to configure the year-end setup to meet the following requirements:
* The accounting adjustments that are received in the first quarter must be able to be posted in to the previous year's Period 13.
* The fiscal year closing can be run again, but only the most recent closing entry will remain in the transactions.
* All dimensions from profit and loss must carry over into the retained earnings.
* All future and previous periods must have an On Hold status.
Solution:
* Configure General ledger parameters.
- Set the Delete close of year transactions option to Yes.
- Set the Create closing transactions during transfer option to Yes.
- Set the Fiscal year status to permanently closed option to No.
* Define the Year-end close template.
- Designate a retained earnings main account for each legal entity.
- Set the Financial dimensions will be used on the Opening transactions option to No.
- Set the Transfer profit and loss dimensions' option to Close All.
* Set future Ledger periods to a status of On Hold.
Does the solution meet the goal?

A. Yes
B. No

Answer: A

Explanation:
Section: Set up and configure financial management
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/financials/general-ledger/year-end-close

NEW QUESTION # 120
You are configuring intercompany accounting for a multicompany enterprise. You need to set up: the Due to and Due from accounts.
Which main account type should you use?

A. Liability
B. Profit and loss
C. Asset
D. Balance sheet
E. Expense

Answer: E

NEW QUESTION # 121
A client confirms a safes order in Dynamics 365 for Finance and Operations. You are viewing the confirmed sales order.

Answer:

Explanation:

Explanation:

NEW QUESTION # 122
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are configuring the year-end setup in Dynamics 365 for Finance and Operations.
You need to configure the year-end setup to meet the following requirements:
The accounting adjustments that are received in the first quarter must be able to be posted in to the previous year's Period 13.
The fiscal year closing can be run again, but only the most recent closing entry will remain in the transactions.
All dimensions from profit and loss must carry over into the retained earnings.
All future and previous periods must have an On Hold status.
Solution:
Configure General ledger parameters.
- Set the Delete close of year transactions option to Yes.
- Set the Create closing transactions during transfer option to Yes.
- Set the Fiscal year status to permanently closed option to No.
Define the Year-end close template.
- Designate a retained earnings main account for each legal entity.
- Set the Financial dimensions will be used on the Opening transactions option to No.
- Set the Transfer profit and loss dimensions' option to Close All.
Set future Ledger periods to a status of On Hold.
Does the solution meet the goal?

A. Yes
B. No

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/financials/general-ledger/year-end-close

NEW QUESTION # 123
A client is implementing the Budgeting module in Dynamics 365 Finance.
You need to configure the correct budget control area to meet the client's requirements.
Track budgeting control on purchase requisitions.
Include unposted actual transactions in the calculation of the remaining budget for the period.
Allow specific individuals to post transactions that exceed the budget.
Specify main accounts that are subject to budget control, instead of selecting Main account as a dimension for budgeting.
What should you configure? To answer, select the appropriate configuration in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/dynamics365/finance/budgeting/budget-control-overview-configuration

NEW QUESTION # 124
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are configuring the year-end setup in Dynamics 365 Finance.
You need to configure the year-end setup to meet the following requirements:
* The accounting adjustments that are received in the first quarter must be able to be posted into the previous year's Period 13.
* The fiscal year closing can be run again, but only the most recent closing entry will remain in the transactions.
* All dimensions from profit and loss must carry over into the retained earnings.
* All future and previous periods must have an On Hold status.
Solution:
* Configure General ledger parameters.
- Set the Delete close of year transactions option to Yes.
- Set the Create closing transactions during transfer option to Yes.
- Set the Fiscal year status to permanently closed option to No.
* Define the Year-end close template.
- Designate a retained earnings main account for each legal entity.
- Set the Financial dimensions will be used on the Opening transactions option to No.
- Set the Transfer profit and loss dimensions' option to Close All.
* Set future Ledger periods to a status of On Hold.
Does the solution meet the goal?

A. Yes
B. No

Answer: A

Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/financials/general-ledger/year-end-close

NEW QUESTION # 125
You are configuring the Fixed assets module for a Dynamics 365 Finance environment.
You need to create a fixed asset.
Which two settings are required? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. the number sequence
B. the property type
C. the group
D. the name
E. the type

Answer: C,D

Explanation:
The type and number sequence are configured in the group so you don't need to enter those values.
Reference:
https://ellipsesolutions.com/dynamics-365-finance-operations-fixed-asset-acquisition-options/

NEW QUESTION # 126
You need to configure the system to for existing purchasing contracts.
Which commitment types should you use? To answer, drag the appropriate commitment types to the correct requirements. Each commitment type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/procurement/tasks/create-purchase-agreement

NEW QUESTION # 127
After you answer a question in this section, you will NOT be able to return to it As a result, these questions will not appear in the review screen.
A company is preparing to complete yearly budgets.
The company plans to use the Budget module in Dynamics 365 for Finance and Operations for budget management You need to create the new budgets.
Solution: Create budget plans for multiple scenarios.
Does the solution meet the goal?

A. Yes
B. No

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/financials/budgeting/budget-planning-overview

NEW QUESTION # 128
You are a functional consultant for Contoso Entertainment System USA (USMF).
You plan to settle accounts by receiving cash payments in US currency.
You need to create a cash receipts journal that uses the US dollar currency.
To complete this task, sign in to the Dynamics 365 portal.

Answer:

Explanation:
See explanation below
Explanation:
Navigate to Finance > Cash Receipt Journals.
Click the +New link to add a new cash receipt journal.
Fill in the required fields including the currency field.

NEW QUESTION # 129
A client wants general journals to be used only to post ledger-type transactions.
You need to set up journal configuration to achieve the requirement.
Solution: Set up default offset account on the journal name.
Does the solution meet the goal?

A. No
B. Yes

Answer: A

NEW QUESTION # 130
You need to configure credit card processing for all three companies
Which option should you use? To answer, select the appropriate options m the answer area NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 131
You need to configure credit card processing for all three companies
Which option should you use? To answer, select the appropriate options m the answer area NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 132
You are creating a budget for an organization.
The organization requires that allocations be performed automatically as part of budget planning.
You need to invoke allocations at a specific budget planning stage.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

Explanation

References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/financials/budgeting/budget-planning-data-allo

NEW QUESTION # 133
You need to configure an Accounts payable charge for freight for a company. The company requires that the system include the freight invoice to be paid to the vendor and record the expense in main account 600120 - Freight In.