Pass 300-815 Exam in First Attempt Guaranteed 2023 Dumps!
300-815 Dumps Full Questions - Exam Study Guide
NEW QUESTION # 25
An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port
5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration?
(Choose two.)
- A. Incoming Port in SIP Trunk Security Profile configuration
- B. Incoming Port in SIP Information section of the SIP Trunk configuration.
- C. Incoming Port in Security Information of the SIP Profile configuration.
- D. Destination Port in SIP Trunk Security Profile configuration
- E. Destination Port in SIP Information section of the SIP Trunk configuration
Answer: A,E
NEW QUESTION # 26
Which two statements are correct with respect to the Client Matter Code setting in the route pattern configuration? (Choose two.)
- A. If you check the Allow Overlap Sending check box, you can also check the Require Client Matter Code check box.
- B. The Client Matter Code feature does not support overlap sending because the Cisco Unified CM cannot determine when to prompt the user for the code.
- C. The Client Matter Code has the option to configure Authorization Level such as in the Forced Authorization Code.
- D. The Client Matter Code feature does support overlap sending because the Cisco Unified Communications Manager can determine when to prompt the user for the code.
- E. If you check the Allow Overlap Sending check box, the Require Client Matter Code check box becomes disabled.
Answer: B,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/ CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features- services-guide-100_chapter_010000.pdf
NEW QUESTION # 27
When configuring hunt groups, where do you add the individual directory numbers that will be part of the group?
- A. line group
- B. hunt list
- C. hunt pilot
- D. route group
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/ cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide-1201_chapter_010101.html
NEW QUESTION # 28
Which two descriptions of the Standard Local Route Group deployment are true? (Choose two.)
- A. chooses the route group that is configured under the device pool of the calling-party device
- B. can be associated only under the route list
- C. can be associated under the route group
- D. can be assigned directly to the route pattern
- E. chooses the route group that is configured under the device pool of the called-party device
Answer: B,E
NEW QUESTION # 29
The administrator of ABC company is troubleshooting a one-way audio issue for a call that uses
H.323protocol (slow-start mode). The administrator requests that you provide the IP and port information of the Real- Time Transport Protocol traffic that had the one-way audio call.
You gather the H.225 and H.245 messages for one of the one-way audio calls. Where can you find the RTP IP and port information for both sides? (Note: This call flow has not invoked any media resources like MTP or transcoders).
- A. H.245 Open Logical Channel
- B. H.225 Connect
- C. H.245 Open Logical Channel Ack
- D. H.245 Terminal Capability Set
Answer: A
NEW QUESTION # 30
Refer to the exhibit.
An administrator is troubleshooting a problem in which some outbound calls from an internal network to the Internet telephony service provider are not getting connected, but some others connect successfully. The firewall team found that some call attempts on port 5060 came from an unrecognized IP that has not been defined in the firewall rule. What should the administrator configure in the Cisco Unified Border Element to fix this issue?
- A. use of port 5061 for SIP secure
- B. ip prefix-list to filter the unwanted IP address
- C. bind signaling and media to the loopback interface
- D. access list allowing the firewall IP
Answer: C
NEW QUESTION # 31
A single site reports that when they dial select numbers, the call connects, but they do not get audio. The administrator finds that the calls are not routing out of the normal gateway but out of another site's gateway due to a TEHO configuration. What is the next step to diagnose and solve the issue?
- A. Verify that IP routing is correct between the gateway and the IP phone.
- B. Verify that the route pattern is not blocking calls to the destination number.
- C. Verify that the dial peer of the gateway has the correct destination pattern configured.
- D. Verify that the route pattern has the correct calling-party transformation mask
Answer: C
NEW QUESTION # 32
Refer to the exhibits.
Regions have been configured for all major branches based on the available circuit bandwidth. Some calls from Region A endpoints to Region B endpoints are failing to connect. How is this issue resolved?
- A. Update all regions to 8 kbps maximum audio bitrate.
- B. Increase the number of available media termination points.
- C. Update the calling search space for affected endpoints to none.
- D. Add a media resource to transcode between available capabilities.
Answer: D
NEW QUESTION # 33
Drag and drop the commands from the bottom to the blanks in the code to implement a translation rule to allow only 11 digits to be received over a SIP trunk to a SIP provider. The Cisco UCM is currently sending calls to the Cisco Unified Border Element in E.
164 format. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 34
Which configuration must an administrator perform to display Translation Pattern operations in Cisco Unified Communications Manager SDL traces?
- A. By default, the Translation Patterns operations are printed in SDL traces, so no additional configuration is necessary.
- B. Check the Translation Patterns Analysis check box in Micro Traces on the Cisco Unified CM Serviceability page.
- C. Set up the Digit Analysis Complexity in Service Parameters for Cisco Unified CM to TranslationAndAlternatePatternAnalysis.
- D. Enable the Detailed Call Analysis option under Enterprise Parameters for Unified CM.
Answer: D
Explanation:
Reference:
https://community.cisco.com/t5/collaboration-voice-and-video/taking-sip-call-trace-on-cisco-unified- cm-using-rtmt/ta-p/3161200
NEW QUESTION # 35
What are two configureation features of the Client matter code setting in the route pattern configuration? (Choose two.)
- A. The Client Matter Code feature provides the option to configure Authorization Level susch as in the Forced Authorization Code.
- B. The client Matter Code feature supports overlap sending since the Cisco UCM can determine when to prompt the user for the code.
- C. Selecting the Allow Overlap Sending setting allows a user to select the Require Client Matter Code setting.
- D. Selecting the Allow Overlap Sending setting disables the Require Client Matter Code setting.
Answer: A,D
NEW QUESTION # 36
A network engineer designs a new dial plan and wants to block a certain range of numbers (8135100 through 8135105). What is the most specific route pattern that can be configured to block only the numbers in this range?
- A. 813510[^0-5]
- B. 813510[12345]
- C. 81XXXXX
- D. 813510[012345]
Answer: D
NEW QUESTION # 37
In Cisco Unified Communications Manager, which tool do you use to check SIP traces?
- A. OS Administration Page
- B. MTP
- C. RTMT
- D. CCSIP
Answer: C
NEW QUESTION # 38
When locations-based Call Admission Control denies the call, which two masks can AAR apply when routing the call through the PSTN? (Choose two.)
- A. AAR destination mask
- B. external phone number mask
- C. called party transform mask
- D. enterrise alternate number mask
- E. +E.164 alternate number mask
Answer: A,B
NEW QUESTION # 39 
Refer to the exhibit. Within the North American Numbering Plan, gateways located in Ottawa, Canada and marked as "YOW" are assigned to the Calling Party Transformation CSS NANP_CgPTP, which contains partition NANP_calling_xforms. What is the calling-party number and the numbering type if the calling user
+1613-555-1234 dials the number?
- A. calling number 613-555-1234 and numbering type "national"
- B. calling number 613-555-1234 and numbering type "subscriber"
- C. calling number 011-1-613-555-1234 and numbering type "subscriber"
- D. calling number 011613-555-1234 and numbering type "international"
Answer: A
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION # 40
Which two types of distribution algorithm are within a line group? (Choose two.)
- A. random
- B. circular
- C. top down
- D. bottom up
- E. highest preference
Answer: B,C
NEW QUESTION # 41
An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port 5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration? (Choose two.)
- A. Incoming Port in SIP Trunk Security Profile configuration
- B. Incoming Port in SIP Information section of the SIP Trunk configuration.
- C. Incoming Port in Security Information of the SIP Profile configuration.
- D. Destination Port in SIP Trunk Security Profile configuration
- E. Destination Port in SIP Information section of the SIP Trunk configuration
Answer: A,E
NEW QUESTION # 42
A customer has multisite deployments with a globalized dial plan. The customer wants to route PSTN calls via the gateway assigned to each site. Which two actions will fulfill the requirement? (Choose two.)
- A. Create one route group for each site and one global route list for PSTN calls that point to the local route group.
- B. Assign one route group as a local route group in the device pool of the corresponding site.
- C. Create one global route list for PSTN calls that points to one global PSTN route group.
- D. Create a hunt group and assign it to each side route pattern
- E. Create a route group which has all the gateways and associate it to the device pool of every site.
Answer: A,B
NEW QUESTION # 43 
Refer to the exhibit. Users report that outbound PSTN calls from phones registered to Cisco Unified Communications Manager are not completing. The local service provider in North America has a requirement to receive calls in 10-digit format. The Cisco Unified CM sends the calls to the Cisco Unified Border Element router in a globalized E.164 format. There is an outbound dial peer on Cisco Unified Border Element configured to send the calls to the provider. The dial peer has a voice translation profile applied in the correct direction but an incorrect voice translation rule applied, which is shown in the exhibit. Which rule modified DNIS in the format that the provider is expecting?
- A. rule 1 /^\+1\([2-9]..[2-9]......$\)/ /\0/
- B. rule 1 /^/+\([^1].*\)/ /011\1/
- C. rule 1 /^\([2-9]..[2-9]......$\)/ /\1/
- D. rule 1/^\+1\([2-9]..[2-9]......$\)/ /\1/
Answer: D
Explanation:
Section: Cisco Unified Border Element
Explanation/Reference:
NEW QUESTION # 44
A company has an SRST gateway running an IOS XE image. The company plans to enable the IPv6 addressing companywide. To enable the IPv6 in a unified SRST gateway to support SIP phones, what are two supported supplementary features for an IPv6 fallback scenario? (Choose two.)
- A. T.38 fax relay
- B. three-way conference
- C. SIP trunk
- D. secure SIP lines
- E. transcoding
Answer: A,B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/ guide/SCCP_and_SIP_SRST_Admin_Guide/srst_sip_isr4000.html
NEW QUESTION # 45
Refer to the exhibit.
Calls incoming from the provider are not working through newly set up Cisco Unified Border Element. Provider engineers get the 404 Not Found SIP message. Incoming calls are coming from the provider with called number "222333444" and Cisco Unified Communications Manager is expecting the called number to be delivered as "444333222". The administrator already verified that the IP address of the Cisco Unified CM is set up correctly and there are no dial peers configured other than those shown in the exhibit. Which action must the administrator take to fix the issue?
- A. Change the destination-pattern on the outgoing dial peer to match "444333222".
- B. Fix the voice translation-rule to match specifically number "222333444" and change it to "444333222".
- C. Create specific matching for "222333444" on the incoming dial peer.
- D. Set up translation-profile on the incoming dial peer to match incoming traffic.
Answer: D
NEW QUESTION # 46
A network engineer designs a new dial plan and wants to block a certain range of numbers (8135100 through
8135105). What is the most specific route pattern that can be configured to block only the numbers in this range?
- A. 813510[^0-5]
- B. 813510[12345]
- C. 81XXXXX
- D. 813510[012345]
Answer: D
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION # 47
Refer to the exhibit.
In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C. Which two scenarios are correct? (Choose two.)
- A. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
- B. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
- C. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
- D. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
- E. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
Answer: A,D
NEW QUESTION # 48
......
To prepare for the exam, candidates can take advantage of various resources, such as Cisco's official study materials, online courses, and practice exams. Passing the Cisco 300-815 exam is an excellent way to demonstrate your expertise in implementing advanced call control and mobility services using Cisco technologies and enhance your career prospects in the IT industry.
Cisco 300-815 is a certification exam that assesses the knowledge and skills of IT professionals in implementing advanced call control and mobility services. 300-815 exam is designed to test the candidates' proficiency in implementing and configuring Cisco Unified Communications Manager, Cisco Unified Communications Manager Express, and Cisco Unity Connection. Individuals who pass 300-815 exam are certified as Cisco Certified Network Professional Collaboration (CCNP Collaboration) experts, which is a highly respected certification in the IT industry.
CCNP Collaboration Free Certification Exam Material from Dumps4PDF with 120 Questions: https://pass4sure.dumps4pdf.com/300-815-valid-braindumps.html