[Sep-2023 Newly Released] 350-501 Exam Questions For You To Pass
Cisco 350-501 Exam: Basic Questions With Answers
As a certification exam, the Cisco 350-501 is highly respected in the industry and is recognized as a validation of a candidate's skills and knowledge in the field of service provider networking. 350-501 exam is part of the Cisco CCNP Service Provider certification track, which is a professional-level certification program aimed at individuals who wish to specialize in service provider networking. For IT professionals who are looking to advance their careers in this field, passing the Cisco 350-501 exam is an important step.
Cisco 350-501 exam consists of 60 to 70 multiple-choice and simulation questions that assess the candidate's knowledge of core service provider technologies, including routing protocols, MPLS, segment routing, and virtualization. 350-501 exam is conducted in a proctored environment, and candidates have 120 minutes to complete it.
NEW QUESTION # 187
Refer to the exhibit.
While troubleshooting the OSPF adjacency between routers R1 and R2 an engineer noticed that both routers are stuck in the EXCHANGE/EXSTART state. What should the engineer fix to solve the ongoing issue?
- A. match MTU values
- B. match OSPF areas
- C. match IPv4 addresses
- D. match OSPF network types
Answer: A
NEW QUESTION # 188
Refer to the exhibit:
Based on the show/ command output, which result m true after BGP session is established?
- A. The IOS XR router does not advertise any routes to the neighbor 192.168.2.2,but it accepts all routes from 192.168.2.2.
- B. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2
- C. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2
- D. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it
Answer: C
NEW QUESTION # 189
Drag and drop the OSPF area types from the left onto the correct statements on the right
Answer:
Explanation:
NEW QUESTION # 190
Refer to the exhibit. It the NetFlow configuration is updated to version 9, which additional piece of information can be reported?
- A. flow sequence numbers
- B. IPv6 flow information
- C. IPv4 flow information
- D. BGP AS information
Answer: D
Explanation:
BGP ASN information was added in Netflow export format 5. Also, it is already defined in the example - a useful hint.
NEW QUESTION # 191
Drag and drop the multicast concepts from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
1: PIM-DM 2:IGMP 3:PIM-SM 3:shared tree 4:source tree
NEW QUESTION # 192
The network team is planning to implement IPv6 on the company's existing IPv4 network infrastructure. The network currently uses IS-IS to share routes between peers. Which task must the team perform so that IS-IS will run in multitopology mode on the updated IPv6 network?
- A. Configure the links between the network routers as point-to-point.
- B. Configure the IS-IS IPv6 metric on the dual-stack links.
- C. Configure the network routers as Level 2 routers.
- D. Configure the network routers to use metric-style wide.
Answer: B
NEW QUESTION # 193
Refer to the exhibit.
The network engineer who manages ASN 65010 is provisioning a customer VRF named CUSTOMER-ABC on PE-2. The PE-CE routing protocol is OSPF Internet reachability is available via the OSPF 0 0 0.0/0 route advertised by CE-1 to PE-1 In the customer VRF Which configuration must the network engineer Implement on PE-2 so that CE-2 has connectivity to the Internet?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: C
NEW QUESTION # 194
Drag and drop methods of Cisco MPLS tunnel traffic assignment from the left onto their characteristics on the right.
Answer:
Explanation:
NEW QUESTION # 195
A network engineer Is implementing a QoS policy for outbound management traffic classification and marking on a CPE device with these requirements:
A network engineer Is implementing a QoS policy for outbound management traffic classification and marking on a CPE device with these requirements
* Management protocols must be marked with DSCP AF class 2 w4h low drop probability.
* Monitoring protocols must be marked with DSCP AF class 1 with low drop probability.
* All remaining traffic must be marked with a DSCP value of 0.
Which configuration must the engineer implement to satisfy the requirements?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0/qos/configuration/guide/nexus1000v_qos/qos_6dscp_val.pdf
NEW QUESTION # 196
Drag and drop the descriptions from the left onto the corresponding OS types on the right.
Answer:
Explanation:
NEW QUESTION # 197
Guidelines -
This is a lab item in which tasks will be performed on virtual devices.
* Refer to the Tasks tab to view the tasks for this lab item.
* Refer to the Topology tab to access the device console(s) and perform the tasks.
* Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
* All necessary preconfigurations have been applied.
* Do not change the enable password or hostname for any device.
* Save your configurations to NVRAM before moving to the next item.
* Click Next at the bottom of the screen to submit this lab and move to the next question.
* When Next is clicked, the lab closes and cannot be reopened.
Topology:
Tasks -
Configure the BGP routing protocol for R1 and R2 according to the topology to achieve these goals:
1. Configure EBGP neighbor adjacency for the IPv4 and IPv6 address family between R1 and R2 using Loopback0 IPv4 and IPv6 addresses. All BGP updates must come from the Loopback0 interface as the source. Do not use IGP routing protocols to complete this task.
2. Configure MD5 Authentication for the EBGP adjacency between R1 and R2. The password is clear text C1sc0!.
Answer:
Explanation:
Here is the solution:
NEW QUESTION # 198
An engineer working for a private telecommunication company with an employee id: 3948:11:613 needs to limit the malicious traffic on their network. Which configuration must the engineer use to implement URPF loose mode on the GigabitEthernetO/1 interface?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: A
Explanation:
Explanation
"reachable-via any" must be configured for Loose mode on both IPv4 & IPv6.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_data_urpf/configuration/xe-3s/sec-data-urpf-xe-3s-book/s
NEW QUESTION # 199
How much must the MTU be increased when configuring the 802.1q VLAN tag?
- A. 12 bytes
- B. 4 bytes
- C. 8 bytes
- D. 2 bytes
Answer: B
NEW QUESTION # 200
Which two routing protocols support Cisco MPLS TE Tunnels? (Choose two.)
- A. IS-IS
- B. EIGRP
- C. OSPF
- D. RIP
- E. BGP
Answer: A,C
NEW QUESTION # 201
Refer to the exhibit. P3 and PE4 are at the edge of the service provider core and serve as ABR routers Aggregation areas are on either side of the core.
Which statement about the architecture is true?
- A. If each area is running its own IGP. BGP must provide an end-to-end MPLS LSP
- B. If each area is running its own IGP. the ABR routers must redistribute the IGP routing table into BGP
- C. To support seamless MPLS, the BGP route reflector feature must be disabled
- D. To support seamless MPLS. TDP must be used as the label protocol
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-
12/configuration_guide/mpls/b_1612_mpls_9600_cg/configuring_seamless_mpls.html
NEW QUESTION # 202
Which control plane protocol is used between Cisco SD-WAN routers and vSmart controllers?
- A. OMP
- B. OTCP
- C. UDP
- D. BGP
Answer: A
NEW QUESTION # 203
Refer to the exhibit:
What does the REST API command do?
- A. It retrieves the information requested by Descriptions xml
- B. It executes the commands specified in Descriptions xml
- C. It removes the information identified by Descriptions xml
- D. It displays the information identified by Descriptions xml
Answer: B
NEW QUESTION # 204
Drag and drop the message types from the left onto the target field of the message originator on the right.
Answer:
Explanation:
NEW QUESTION # 205
Drag and drop the functionalities from the left onto the correct target fields on the right.
Answer:
Explanation:
NEW QUESTION # 206 
Refer to the exhibit. This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?
- A. It shows that the running configuration is blank.
- B. It shows that the full configuration is being modeled by YANG.
- C. It shows the hostname of the device as rpc-reply.
- D. It shows NETCONF uses remote procedure calls.
Answer: D
Explanation:
Section: Automation and Assurance
NEW QUESTION # 207
Refer to the exhibit:
An engineer wants to authenticate the OSPF neighbor between PEA and PE-B using MD5.
Which command on PE-B successfully completes the configuration?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: A
NEW QUESTION # 208
Drag and drop the OSPF area types from the left onto the correct statements on the right
Answer:
Explanation:
NEW QUESTION # 209
While implementing TTL security, an engineer issues the PE(config-router-af)#neighbor 2.2.2.2 ttl-security hops 2 command. After issuing this command, which BGP packets does the PE accept?
- A. from 2.2.2.2, with a TTL of less than 2
- B. to 2.2.2.2, with a TTL of 2 or more
- C. from 2.2.2.2, with a TTL of 253 or more
- D. to 2.2.2.2, with a TTL of less than 253
Answer: C
NEW QUESTION # 210
Drag and drop the OSPF area types from the left onto the correct statements on the right
Answer:
Explanation:
NEW QUESTION # 211
......
New 2023 Realistic Free Cisco 350-501 Exam Dump Questions and Answer: https://pass4sure.dumps4pdf.com/350-501-valid-braindumps.html