GB0-713-ENU Study Guide: Latest [May 21, 2026] Realistic Verified GB0-713-ENU Dumps
GB0-713-ENU Questions & Practice Test are Available On-Demand
NEW QUESTION # 28
The motherboard chipset determines the following parameters:
- A. Motherboard bus frequency
- B. Supported CPU types
- C. Type and quantity of extension interfaces
- D. Type and quantity of expansion slots
Answer: A,B,C,D
NEW QUESTION # 29
Which of the following statements about CAS characteristics is correct:
- A. HA takes into account the virtual machine CPU, memory, I/O throughput load factors and the virtual machine's affinity to the physical host to dynamically adjust the distribution of business loads and improve system availability.
- B. DRX takes into account the virtual machine CPU, memory, I/O throughput load factors and the virtual machine's affinity to the physical host to dynamically adjust the distribution of business loads and improve system availability.
- C. V2V supports converting virtual machines in various formats such as VMware, Citrix, KVM, etc. into H3CCAS virtual machines
- D. When a server fails, DRS can automatically select a space server and restart the VM on an idle server.
Answer: C
NEW QUESTION # 30
Which of the following statements about the functions and effects of the CVM module is correct?
- A. CVM supports high availability (HA), dynamic resource scheduling (DRS), virtual machine backup, network policy templates and other functions
- B. If the server is only used for CVM management and not as a CVK computing resource, the server does not need to support hardware-assisted virtualization.
- C. CVM is responsible for server hardware resource management and virtual machine creation management
- D. Each server needs to install CVM as the hypervisor layer of server virtualization
Answer: A,B,C
NEW QUESTION # 31
The following statement about modifying a virtual machine is correct:
- A. After the virtual machine is created, the display name cannot be modified.
- B. All types of virtual hard disks support online addition and expansion.
- C. After the virtual machine is created, you can add hard disks, network cards and other devices to the virtual machine
- D. You can set the virtual machine to start with the host, but this function becomes invalid after HA is enabled.
Answer: C,D
NEW QUESTION # 32
Each SCSI channel has a maximum of () SCSI IDs and can connect a maximum of () storage devices:
- A. 15/14
- B. 17/16
- C. 16/15
- D. 14/13
Answer: C
NEW QUESTION # 33
Which of the following descriptions about virtual machines is correct?
- A. The virtual machine configuration file defines the virtual hardware information of the virtual machine
- B. The virtual machine mainly includes configuration files and image files
- C. The system time of the CVK host where the virtual machine is located will not be synchronized during the virtual startup process
- D. A virtual machine is a complete system running on a physical server. It contains its own virtual CPU, memory, disk, network card and other virtual hard disk resources.
Answer: A,B,D
NEW QUESTION # 34
Which of the following statements about alarm management is correct?
- A. The alarm information records the alarm source, abnormality occurrence time, possible abnormality causes, recovery suggestions, etc.
- B. When the virtual machine cannot connect, an alarm can be generated
- C. Administrators can manually record maintenance experience
- D. When a host goes down, the CVM console will record relevant information and generate an alarm
Answer: B,C,D
NEW QUESTION # 35
The correct statements about UIS Manager are:
- A. UIS Manager can be embedded in the blade switch to manage UIS8000 blade frame
- B. UIS Manager can be embedded in TOR switch to manage rack servers
- C. UIS Manager can manage UIS Pack cabinets
- D. UIS Manager can be used to manage the M8300 itself
Answer: A,B,C,D
NEW QUESTION # 36
Which of the following descriptions about virtual machine high availability HA is correct?
- A. After the cluster enables the HA function, all hosts in the cluster are required to mount the system shared storage
- B. After enabling the HA function, CVM will continuously monitor the operation of all server hosts and virtual machines in the cluster. When a host or virtual machine fails, CVM will immediately respond and restart all affected virtual machines on other available hosts in the cluster.
- C. After the cluster enables HA, all virtual machines in the cluster have HA enabled, and the HA function of a single virtual machine cannot be disabled.
- D. HA functionality provides easy-to-use, cost-effective availability for applications running on all virtual machines in a cluster.
Answer: A,B,D
NEW QUESTION # 37
Which statement about multipathing is correct?
- A. The main function of multipath is to improve reliability and achieve load balancing, but it cannot increase link bandwidth.
- B. If the host has two HBA ports, the storage side has two controllers, and each controller has two HBA ports, then the host side can discover a total of 4 storage paths
- C. If there is no multipath software, one LUN will be recognized as multiple LUNs on the host side.
- D. Multipathing can be implemented in two modes: Active-Active mode and Active-Passive mode.
Answer: B,C,D
NEW QUESTION # 38
The correct steps to modify the CVK host management network IP address and host name are:
1. Add CVK host to the cluster
2. Migrate the virtual machine to another CVK host
3. Delete the CVK host in the cluster
4. Complete the modification of IP address and host name in the xConsole interface of the CVK host
5. Migrate the virtual machine back to the CVK host
- A. 4 2 1 5 3
- B. 4 2 3 5 1
- C. 2 3 4 1 5
- D. 3 4 2 1 5
Answer: C
NEW QUESTION # 39
Which of the following descriptions of virtual switches is correct?
- A. Virtual switches provide network connectivity between virtual machines and external networks
- B. The management virtual switch carries important messages such as management messages and virtual machine migration messages.
- C. A virtual switch is a network platform that simulates the functions of a physical switch system through software.
- D. It is recommended to create independent management, storage and business virtual machines and divide them into different VLANs
Answer: A,B,C,D
NEW QUESTION # 40
To configure memory for a virtual machine, the following statement is correct
- A. The virtual machine does not occupy memory when it is turned off
- B. The virtual machine memory is modified online, and a cold restart of the virtual machine is required to take effect
- C. The memory configuration of all virtual machines on a host may be greater than the total memory of the host.
- D. The memory allocated to a virtual machine can be greater than the physical memory
Answer: A,B,C
NEW QUESTION # 41
The unit for allocating computing resources is
- A. Host
- B. Cluster
- C. Host pool
- D. Virtual Machine
Answer: B
NEW QUESTION # 42
Regarding storage pools, the following statements are incorrect:
- A. NFS network file system can be accessed by multiple servers
- B. A shared file system can be mounted by multiple servers
- C. There is no limit on the number of hosts that can mount the same shared file system
- D. ISCSI network storage can be assigned to virtual machines after being mounted on the host
Answer: C
NEW QUESTION # 43
Regarding server RAID cards, the correct statement is:
- A. write back mode, data will be written directly to the disk, high security
- B. When using FBWC, data retention time does not exceed 72 hours. If the phone is disconnected, the server recovery data must be flashed to the hard disk as soon as possible.
- C. The array card cache must be used with a cache battery, otherwise there is a risk of data loss after a power outage
- D. Server disks do not require array cards to be used for RAID0
Answer: C
NEW QUESTION # 44
SDN is the abbreviation of Software Defined Network. SDN is not a specific technology. It is a network design concept that plans the interaction between the various components of the network (software, hardware and software). Its characteristic attributes include:
- A. Centralized network control
- B. Separation of control plane and forwarding plane
- C. Automated application control for network services
- D. Open programmable interface
Answer: A,B,D
NEW QUESTION # 45
......
Valid GB0-713-ENU Exam Dumps Ensure you a HIGH SCORE: https://pass4sure.dumps4pdf.com/GB0-713-ENU-valid-braindumps.html