Online Questions - Valid Practice To your AZ-500 Exam (Updated 497 Questions)
Practice To AZ-500 - Remarkable Practice On your Microsoft Azure Security Technologies Exam
NEW QUESTION # 201
You have an Azure subscription that contains the virtual networks shown in the following table.
The subscription contains the subnets shown in the following table.
You plan to create an Azure web app named WebApp2 that will have the following configurations:
* Region: East US
* VNet integration: Enabled
* Scale out; Autoscale to up to 10 instances
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 202
You have an Azure subscription that contains a web app named App1 and an Azure key vault named Vault1.
You need to configure App1 to store and access the secrets in Vault1.
How should you configure App1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/app-service/overview-managed-identity?tabs=dotnet
NEW QUESTION # 203
You need to deploy AKS1 to meet the platform protection requirements.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/aks/azure-ad-integration
NEW QUESTION # 204
You need to meet the technical requirements for VNetwork1.
What should you do first?
- A. Remove the NSGs from Subnet11 and Subnet13.
- B. Configure DDoS protection for VNetwork1.
- C. Create a new subnet on VNetwork1.
- D. Associate an NSG to Subnet12.
Answer: C
Explanation:
From scenario: Deploy Azure Firewall to VNetwork1 in Sub2.
Azure firewall needs a dedicated subnet named AzureFirewallSubnet.
References:
https://docs.microsoft.com/en-us/azure/firewall/tutorial-firewall-deploy-portal
Topic 2, Litware, inc
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Litware, Inc. is a digital media company that has 500 employees in the Chicago area and 20 employees in the San Francisco area.
Existing Environment
Litware has an Azure subscription named Sub1 that has a subscription ID of
43894a43-17c2-4a39-8cfc-3540c2653ef4.
Sub1 is associated to an Azure Active Directory (Azure AD) tenant named litwareinc.com. The tenant contains the user objects and the device objects of all the Litware employees and their devices. Each user is assigned an Azure AD Premium P2 license. Azure AD Privileged Identity Management (PIM) is activated.
The tenant contains the groups shown in the following table.
The Azure subscription contains the objects shown in the following table.
Azure Security Center is set to the Free tier.
Planned changes
Litware plans to deploy the Azure resources shown in the following table.
Litware identifies the following identity and access requirements:
All San Francisco users and their devices must be members of Group1.
The members of Group2 must be assigned the Contributor role to Resource Group2 by using a permanent eligible assignment.
Users must be prevented from registering applications in Azure AD and from consenting to applications that access company information on the users' behalf.
Platform Protection Requirements
Litware identifies the following platform protection requirements:
Microsoft Antimalware must be installed on the virtual machines in Resource Group1.
The members of Group2 must be assigned the Azure Kubernetes Service Cluster Admin Role.
Azure AD users must be to authenticate to AKS1 by using their Azure AD credentials.
Following the implementation of the planned changes, the IT team must be able to connect to VM0 by using JIT VM access.
A new custom RBAC role named Role1 must be used to delegate the administration of the managed disks in Resource Group1. Role1 must be available only for Resource Group1.
Security Operations Requirements
Litware must be able to customize the operating system security configurations in Azure Security Center.
NEW QUESTION # 205
You need to meet the identity and access requirements for Group1.
What should you do?
- A. Delete Group1. Create a new group named Group1 that has a membership type of Office 365. Add users and devices to the group.
- B. Add a membership rule to Group1.
- C. Modify the membership rule of Group1.
- D. Change the membership type of Group1 to Assigned. Create two groups that have dynamic memberships. Add the new groups to Group1.
Answer: D
Explanation:
https://docs.microsoft.com/en-us/azure/active-directory/users-groups-roles/groups-dynamic-membership Scenario:
Litware identifies the following identity and access requirements: All San Francisco users and their devices must be members of Group1.
The tenant currently contain this group:
References:
https://docs.microsoft.com/en-us/azure/active-directory/users-groups-roles/groups-dynamic-membership
https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/active-directory-groups-create-azure-portal
NEW QUESTION # 206
You have an Azure subscription named Sub1 that contains the virtual machines shown in the following table.
You need to ensure that the virtual machines in RG1 have the Remote Desktop port closed until an authorized user requests access.
What should you configure?
- A. just in time (JIT) VM access
- B. Azure Active Directory (Azure AD) conditional access
- C. Azure Active Directory (Azure AD) Privileged Identity Management (PIM)
- D. an application security group
Answer: A
Explanation:
Explanation
Just-in-time (JIT) virtual machine (VM) access can be used to lock down inbound traffic to your Azure VMs, reducing exposure to attacks while providing easy access to connect to VMs when needed.
Note: When just-in-time is enabled, Security Center locks down inbound traffic to your Azure VMs by creating an NSG rule. You select the ports on the VM to which inbound traffic will be locked down. These ports are controlled by the just-in-time solution.
When a user requests access to a VM, Security Center checks that the user has Role-Based Access Control (RBAC) permissions that permit them to successfully request access to a VM. If the request is approved, Security Center automatically configures the Network Security Groups (NSGs) and Azure Firewall to allow inbound traffic to the selected ports and requested source IP addresses or ranges, for the amount of time that was specified. After the time has expired, Security Center restores the NSGs to their previous states. Those connections that are already established are not being interrupted, however.
Reference:
https://docs.microsoft.com/en-us/azure/security-center/security-center-just-in-time
NEW QUESTION # 207
You need to ensure that the Azure AD application registration and consent configurations meet the identity and access requirements.
What should you use in the Azure portal? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/manage-apps/configure-user-consent
NEW QUESTION # 208
You have an Azure subscription that is linked to an Azure AD tenant and contains the virtual machines shown in the following table.
The subnets of the virtual networks have the service endpoints shown in the following table.
You create the resources shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 209
You have an Azure subscription name Sub1 that contains an Azure Policy definition named Policy1. Policy1 has the following settings:
Definition location: Tenant Root Group
Category: Monitoring
You need to ensure that resources that are noncompliant with Policy1 are listed in the Azure Security Center dashboard.
What should you do first?
- A. Change the Category of Policy1 to Security Center.
- B. Change the Definition location of Policy1 to Sub1.
- C. Assign Policy1 to Sub1.
- D. Add Policy1 to a custom initiative.
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/governance/policy/overview
NEW QUESTION # 210
You have an Azure Storage account that contains a blob container named container! and a client application named App1. You need to enable App1 access to container1 by using Microsoft Entra authentication. What should you do? lo answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 211
You have an Azure subscription that contains an Azure Data Lake Storage Gen2 account named storage1. You deploy an Azure Synapse Analytics workspace named synapsews1 to a managed virtual network. You need to enable access from synapsews1 to storage1. What should you configure?
- A. a private endpoint
- B. a network security group (NSG)
- C. peering
- D. a virtual network gateway
Answer: A
NEW QUESTION # 212
You plan to deploy a custom policy initiative for Microsoft Defender for Cloud.
You need to identify all the resource groups that have a Delete lock.
How should you complete the policy definition? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
A screenshot of a computer Description automatically generated
NEW QUESTION # 213
You have an Azure subscription that contains the virtual networks shown in the following table.
The subscription contains the virtual machines shown in the following table.
On NIC1, you configure an application security group named ASG1.
On which other network interfaces can you configure ASG1?
- A. NIC2 only
- B. NIC2, NIC3, NIC4, and NIC5
- C. NIC2 and NIC3 only
- D. NIC2, NIC3, and NIC4 only
Answer: C
Explanation:
Only network interfaces in NVET1, which consists of Subnet11 and Subnet12, can be configured in ASG1, as all network interfaces assigned to an application security group have to exist in the same virtual network that the first network interface assigned to the application security group is in.
Reference:
https://azure.microsoft.com/es-es/blog/applicationsecuritygroups/
NEW QUESTION # 214
You have an Azure subscription that contains the Azure virtual machines shown in the following table.
You create an MDM Security Baseline profile named Profile1.
You need to identify to which virtual machines Profile1 can be applied.
Which virtual machines should you identify?
- A. VM1 only
- B. VM1 and VM3 only
- C. VM1, VM2, VM3, and VM4
- D. VM1, VM2, and VM3 only
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/mem/intune/protect/security-baselines
NEW QUESTION # 215
You have an Azure subscription that contains the resources shown in the following table.
You need to configure network connectivity to meet the following requirements:
* Communication from VM1 to storage' must traverse an optimized Microsoft backbone network.
* All the outbound traffic from VM1 to the internet must be denied.
* The solution must minimize costs and administrative effort
What should you configure for VNetl and NSG1? To answer, drag the appropriate components to the correct resources. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 216
You have an Azure subscription named Subscription1 that contains the resources shown in the following table.
You create an Azure role by using the following JSON file.
You assign Role1 to User1 for RG1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NO
NO
NO
Reference:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles#compute
NEW QUESTION # 217
You have an Azure subscription that contains an Azure key vault named KeyVault1 and the virtual machines shown in the following table.
You set the Key Vault access policy to Enable access to Azure Disk Encryption for volume encryption.
KeyVault1 is configured as shown in the following exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 218
You are configuring just in time (JIT) VM access to a set of Azure virtual machines.
You need to grant users PowerShell access to the virtual machine by using JIT VM access.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 219
......
To earn the Microsoft AZ-500 certification, candidates must have a solid understanding of Microsoft Azure security technologies, best practices, and industry standards. Passing the exam demonstrates that the candidate has the necessary skills and knowledge to secure and manage Azure environments, making them a valuable asset to any organization using the Azure platform. Overall, the Microsoft AZ-500 certification is an excellent way for IT professionals to showcase their expertise in Azure security and advance their careers in the field.
True AZ-500 Exam Extraordinary Practice For the Exam: https://pass4sure.dumps4pdf.com/AZ-500-valid-braindumps.html