Sample Questions of 300-430 Dumps With 100% Exam Passing Guarantee
Pass Key features of 300-430 Course with Updated 218 Questions
The implementation of wireless networks in an enterprise environment requires a deep understanding of wireless technologies, networking concepts, security protocols, and best practices. The Cisco 300-430 exam covers a wide range of topics, including wireless site surveys, wireless LAN architecture, RF design, WLAN security, network services, and device hardening. Candidates who pass 300-430 exam will demonstrate their proficiency in implementing and maintaining reliable, secure, and scalable wireless networks.
NEW QUESTION # 48
Which three properties are used for client profiling of wireless clients? (Choose three.)
- A. IP address
- B. HTTP user agent
- C. hostname
- D. DHCP
- E. OS version
- F. MAC OUI
Answer: B,D,F
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html
NEW QUESTION # 49
An engineer has been hired to implement a way for users to stream video content without having issues on the wireless network. To accomplish this goal, the engineer must set up a reliable way for a Media Stream to work between Cisco FlexConnect APs. Which feature must be enabled to guarantee delivery?
- A. Multicast Direct
- B. Unicast Direct
- C. Multicast-to-Unicast Direct
- D. IGMP Direct
Answer: A
NEW QUESTION # 50
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
- A. Trust DSCP
- B. Set QoS to Platinum
- C. Enable CAC
- D. Allow WMM
Answer: A
Explanation:
NEW QUESTION # 51
An IT department receives a report of a stolen laptop and has information on the MAC address of the laptop. Which two settings must be set on the wireless infrastructure to determine its location? (Choose two.)
- A. Client location tracking must be enabled on the MSE.
- B. Tracking optimization must be enabled on the WL
- C. Location History for Clients must be enabled on the MS
- D. Location History for Visitors must be enabled on the MSE.
- E. Location History for Rogue APs & Rogue Clients must be enabled on the MSE.
Answer: A,B
NEW QUESTION # 52
An engineer completed the basic installation for two Cisco CMX servers and is in the process of configuring high availability, but it fails. Which two statements about the root of the issue are true? (Choose two.)
- A. The types of the primary and secondary Cisco CMX installations differ.
- B. The delay between the primary and secondary instance is 200 ms.
- C. The sizes of the primary and secondary Cisco CMX installations differ.
- D. The Cisco CMX instances are installed in the same subnet.
- E. Both Cisco CMX installations are virtual.
Answer: A,C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/mse/106/cmx_config/b_cg_cmx106/managing_cisco_cmx_syste Pre-requisites for HA Both the primary and the secondary server should be of the same size and the same type (VM or physical appliance).
Both the primary and the secondary server should have the same Cisco CMX version.
Both the primary and the secondary server should be connected on the same subnet.
Both the primary and the secondary server should be connected on the same subnet if Layer 2 HA is required.
Both the primary and the secondary server should be IP connected with delay of less then 250ms if Layer 3 HA is used.
From Cisco CMX release 10.6.2, NTP server settings must be configured on both Primary and Secondary server instance before HA pairing starts. We recommend that you use the same NTP server on both Primary and Secondary. As a Cisco CMX admin you can also use a dedicated NTP for Primary and Secondary.
NEW QUESTION # 53
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: C
NEW QUESTION # 54
An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network.
Which element do you configure in a rule?
- A. mark
- B. permit-ACL
- C. WMM required
- D. rate-limit
Answer: A
NEW QUESTION # 55
A wireless network has been implemented to enable multicast video to be streamed reliably over the wireless link to the wireless users. After a client reports that the video is unable to stream, the administrator determines that the client is connecting at a data rate of 12 Mbps and is trying to stream to a valid multicast address on the network. Which two actions must be applied? (Choose two.)
- A. Allow RTSP to stream the video due to wireless multicast not using acknowledgements.
- B. Implement video-stream for the multicast video on the controller.
- C. Change the WLAN QoS value to Bronze for the WLAN that multicast will be enabled.
- D. Turn off IGMP snooping for all the configured WLANs on the controller.
- E. Allow multicast-direct to work correctly and multicast-direct to be enabled globally.
Answer: B,E
NEW QUESTION # 56
A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails. Which configuration change resolves this issue?
- A. Run root patch to first upgrade to version 10.6.2 and then migrate to version 10.6.3.
- B. Upgrade the high availability pair to version 10.6.2 image first and then upgrade to version 10.6.3.
- C. Save configuration and use the upgrade script to upgrade the high availability pair without breaking the high availability.
- D. Break the high availability using the cmxha config disable command and upgrade the primary and secondary individuality.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/availability/high-availability/213664-configure-cmx-high-availability.html
NEW QUESTION # 57
What is configured to use more than one port on the OEAP to extend the wired network's?
- A. AAA override
- B. remote LAN ACL
- C. remote LAN
- D. client load balancing
Answer: C
Explanation:
NEW QUESTION # 58
Refer to the exhibit.
An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the network. Based on the local EAP debug controller provided, why is the client unable to connect?
- A. The Cisco WLC local EAP profile is misconfigured
- B. The user is using invalid credentials.
- C. The client is falling to accept certificate.
- D. The Cisco WLC is configured for the incorrect date.
Answer: B
NEW QUESTION # 59
What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?
- A. EAP-FAST with CAPWAP DTLS + port authentication
- B. EAP-TLS with 802.1x port authentication
- C. EAP-FAST with CAPWAP DTLS
- D. EAP-PEAP with 802.1x port authentication
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/1612/configguide/ewc_cg_16_12/802_1x_support.pdf
NEW QUESTION # 60
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
- A. Trust DSCP
- B. Allow WMM
- C. Set QoS to Platinum
- D. Enable CAC
Answer: B
Explanation:
Explanation
Text Description automatically generated with medium confidence
NEW QUESTION # 61
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. WPA+WPA2
- B. Static WEP
- C. CKIP
- D. 802.1X
- E. Static WEP + 802.1X
Answer: A,B
Explanation:
NEW QUESTION # 62
A wireless engineer is configuring LWA using ISE. The customer is a starting company and requested the wireless users to authenticate against a directory, but LDAP is unavailable. Which solution be proposed in order to have the same security and user experience?
- A. Use SAML
- B. Use Novell eDirectory
- C. Use a preshared key on the corporate WLAN
- D. Use the internal database of the RADIUS server.
Answer: B
NEW QUESTION # 63
An engineer is integrating a new Cisco Mobility Services Engine with Cisco Prime Infrastructure to use Cisco CMX Location Analytics. Which action is required?
- A. Install Cisco Prime infrastructure with floor maps
- B. Enable Context Aware and CMX Browser Engage
- C. Enable tracking parameters in Cisco Mobility Service Engine
- D. Set history parameters in Cisco Mobility Service Engine
Answer: C
NEW QUESTION # 64
An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured on the Cisco WLC to allow the user to print a printer on his home network?
- A. split tunneling
- B. FlexConnect
- C. SE-connect
- D. AP failover priority
Answer: A
Explanation:
NEW QUESTION # 65
A wireless engineer has performed a Wireshark ccapture on an 802.1x authentication process to troubleshoot a connectivity issue.
Which two types of packet does the EAP contain? (Choose two.)
- A. EAP response
- B. EAP failure
- C. EAP complete
- D. EAP request
- E. EAP reply
Answer: A,D
NEW QUESTION # 66
Which QoS level is recommended for guest services?
- A. platinum
- B. gold
- C. bronze
- D. silver
Answer: C
NEW QUESTION # 67
Refer to the exhibit.
The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server. What does the capture prove?
- A. The Cisco CMX server receives Angle-of-Arrival data from the WLC.
- B. The Cisco CMX server receives SNMP traffic from the WLC.
- C. The Cisco CMX server receives NetFlow data from the WLC.
- D. The Cisco CMX server receives NMSP traffic from the WLC.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/connected-mobile-experiences/200907-configuring-and-tro
NEW QUESTION # 68
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
- A. config flexconnect BranchA-FCG vlan 30 add
- B. config flexconnect group BranchA-FCG vlan 30 add
- C. config flexconnect BranchA-FCG vlan add 30
- D. config flexconnect group BranchA-FCG vlan add 30
Answer: D
Explanation:
NEW QUESTION # 69
......
300-430 Sample Practice Exam Questions 2024 Updated Verified: https://pass4sure.dumps4pdf.com/300-430-valid-braindumps.html